OXVA XLIM SQ Pro 2 Pod Kit

Compatibility

Compatible replacement pods & resistances

Compatibility last checked 2026-07-31.

Verified compatibilityChecked against manufacturer data

Genuine productsAuthenticity guidance included

Secure checkout & supportEncrypted payment · UK customer support

Overview

The OXVA XLIM SQ Pro 2 puts XLIM internals into a flat, squared-off body that sits differently in a pocket to the tube-shaped models. Behind the 1.09-inch touch screen is a 1600mAh battery, the largest of the XLIM Pro group, with wattage set from 5W to 30W and an Eco mode for longer runtime.

The square shape does not mean a special cartridge. It takes standard XLIM Top Fill, XLIM V2 and XLIM EZ cartridges in 0.4, 0.6, 0.8 and 1.2 ohm, so it restocks from the same XLIM cartridges as the rest of the range.

Note that OXVA does not list a charging cable in the box. See the rest of the range in OXVA XLIM pod kits.

Compare the range

Compare OXVA's screen-equipped kits

Check the cartridge row before anything else. The XLIM SQ Pro 2 and XLIM 3 Ultra both take standard XLIM cartridges, so they share a restock with most of the OXVA range. The Vprime does not - it uses its own VPRIME cartridges, which no other OXVA device accepts. That is a long-term commitment, not a detail.

Compare OXVA's screen-equipped kits — model comparison. Prices and availability are shown live from each product.
Attribute	OXVA XLIM SQ Pro 2 Pod Kit £27.99You're viewing	OXVA XLIM 3 Ultra Pod Kit £28.99	OXVA Vprime Pod Kit £29.99
Compatible cartridges	XLIM Top Fill, XLIM V2 and XLIM EZ cartridges	XLIM Top Fill cartridge family	VPRIME cartridges only - XLIM cartridges do not fit
Battery	1600mAh built in	1500mAh built in	2600mAh built in
Output range	5-30W, set on the touch screen	5-30W, set on the touch screen	5-60W
Display	1.09-inch touch screen	2.2-inch full touch screen	0.96-inch colour screen with three interface themes
Modes	Eco mode for longer battery life	Eco mode for longer battery life	None published
Included cartridges	0.6Ω pre-installed and 0.8Ω spare	0.6Ω pre-installed and 0.8Ω spare	0.2Ω pre-installed and 0.6Ω spare
Charging cable	Not included	Included	Included
Size	93.4 × 48.0 × 20.01mm	121.9 × 28.9 × 16.5mm	105.5 × 37.8 × 23.45mm
Weight	114g	90g	116g

Shared by all: All three have a screen, side airflow control, USB Type-C charging at 5V/2A, and 2ml (TPD) cartridges in the UK.

Comparison facts were checked against current product packaging and manufacturer information, last checked 2026-08-01. Where sources differed, evidence for the current Vape Offers SKU took priority. Each model's price and availability are shown live from its own product record.

Add your own e-liquid

E-liquid: what to use & where to buy

Nothing arrives pre-filled, so e-liquid is bought separately and the right one depends on the cartridge you fit.

The 0.8 ohm cartridge supplied with the kit is paired by OXVA with nicotine salts, and the 0.6 ohm takes freebase or salt. As a rule the tighter, cooler resistances suit higher-strength salts, and the warmer more open ones suit lower strengths.

Thick high-VG shortfills are the one thing to avoid. A mesh coil this small cannot wick liquid that heavy fast enough, and the result is a dry hit rather than a bigger cloud.

Verified resistance-specific guidance, where available, is shown with each pod in the compatibility section above. Ready to stock up?

Is this right for you?

Prefilled pods vs. the full kit

This is the kit: the XLIM Pro device itself, supplied with two cartridges so you can start straight away. If you already own an XLIM Pro and just need cartridges, buy those on their own instead - you do not need a second device.

E-liquid is separate either way. This is a refillable system, so nothing arrives pre-filled.

OXVA lists the XLIM Pro as taking the XLIM Top Fill cartridge, the V3 cartridges in 0.4, 0.6, 0.8 and 1.2 ohm, the older V2 cartridges in 0.6, 0.8 and 1.2 ohm, and OXVA's prefilled cartridges.

There is one documented exception, and OXVA states it plainly on their own specification: the XLIM C cartridge does not fit. The XLIM C is a separate platform with its own cartridges despite sharing the XLIM name.

NeXLIM cartridges are a different platform again and are not compatible either.

Before you order

What is in the kit?

1 × OXVA XLIM SQ Pro 2 device
1 × XLIM Top Fill 0.6Ω cartridge, pre-installed
1 × XLIM Top Fill 0.8Ω cartridge
1 × lanyard
1 × user manual, quick guide and use suggestion card

OXVA does not include a USB-C cable with this kit. Cartridges are the 2ml UK version and no e-liquid is supplied.

The basics

How it works

The XLIM Pro runs a 1000mAh battery at 5-30W and fires either on the button or by drawing on it, whichever you prefer. Airflow is set with a slider on the side of the device rather than by twisting the cartridge, so once you find your draw it stays put.

The cartridge carries the coil, so the resistance you fit is what decides the experience. OXVA publishes a wattage band for each one: 0.4 ohm at 26-30W, 0.6 ohm at 20-25W, 0.8 ohm at 12-16W and 1.2 ohm at 10-12W. The two supplied with the kit are 0.6 and 0.8 ohm, which between them cover most of the range from a warmer restricted draw to a tighter mouth-to-lung one.

Charging is over USB-C at 5V/2A.

Get started

Setup & how to use

Take the cartridge out, lift the silicone stopper on the top edge and fill slowly, leaving a small air gap rather than filling to the brim. Close the stopper firmly and seat the cartridge back in the device.

Leave a freshly filled cartridge to stand for a few minutes before the first draw, and take two or three pulls without firing to help the coil wick. This is the step most people skip, and it is the reason a brand-new cartridge can taste burnt on day one.

Set the wattage inside OXVA's band for the resistance you fitted, starting at the lower end, and open or close the side airflow slider until the draw feels right.

If something is not right

Troubleshooting

A burnt taste on a new cartridge almost always means it was fired before the wick had saturated, or that the wattage is set above OXVA's band for that resistance. Neither can be undone once the cotton has scorched, so it is worth getting right first time.

No fire or weak output is usually the contacts rather than the device. Remove the cartridge, wipe the contacts on both the cartridge and inside the device with a dry tissue, and reseat it firmly.

Gurgling or liquid in the mouthpiece points to overfilling or a stopper that has not been pressed fully shut. Very thick high-VG e-liquid can flood these coils for the same reason.

If the device will not charge, try a different USB-C cable before assuming a fault - the port collects pocket lint and a dry cocktail stick clears it.

Verified product facts

Specifications

Product type: Refillable pod kit
Battery: 1600mAh built in
Output range: 5-30W, set on the touch screen
Modes: Eco mode for longer battery life
Charging: USB Type-C, 5V/2A
Display: 1.09-inch touch screen
Airflow: Side airflow control
UK cartridge capacity: 2ml
Included cartridges: 0.6Ω pre-installed and 0.8Ω spare
Compatible resistances: 0.4Ω, 0.6Ω, 0.8Ω and 1.2Ω
Compatible cartridges: XLIM Top Fill, XLIM V2 and XLIM EZ cartridges
Dimensions: 93.4 × 48.0 × 20.01mm
Weight: 114g
Materials: Zinc alloy with IML or artificial leather panel
Charging cable: Not included

Use it safely

Safety, storage & recycling

Keep the device and its built-in battery away from extreme heat, water and direct sunlight. Charge on a non-flammable surface using a USB-C lead and don't leave it charging unattended. Keep the device, pods and e-liquid out of reach of children and pets, and wash your hands after handling e-liquid.

At end of life, don't put the device in general waste — recycle it at a battery or small-electricals recycling point, or via a vape take-back scheme where available. Empty pods can be recycled with small electricals where accepted.

Helpful answers

Frequently asked questions

Which cartridges does the SQ Pro 2 take?

Standard XLIM cartridges - OXVA lists XLIM Top Fill, XLIM V2 and XLIM EZ as compatible, in 0.4, 0.6, 0.8 and 1.2 ohm. The square body does not mean a special pod.

OXVA publishes the capacity as 2ml and does not confirm whether the larger 3ml XLIM cartridge fits this chassis.

Is a charging cable included?

No. OXVA lists the device, two cartridges, a lanyard and the printed guides - no cable. You will need your own USB-C lead.

Editorial standards

How we verified this product

Vape Offers checked the battery, output range, screen size, charge rate, cartridge compatibility, dimensions, weight, materials and pack contents against OXVA's published XLIM SQ Pro 2 specification and OXVA's own tutorial page, accessed 1 August 2026. OXVA does not publish whether the device is draw-activated, button-fired or both, so no activation claim is made. It also does not confirm whether the larger 3ml XLIM cartridge fits this chassis.

OXVA XLIM SQ Pro 2 Pod Kit

Compatible replacement pods & resistances