OXVA XLIM Go Pod Kit

Compatibility

Compatible replacement pods & resistances

Compatibility last checked 2026-07-31.

Verified compatibilityChecked against manufacturer data

Genuine productsAuthenticity guidance included

Secure checkout & supportEncrypted payment · UK customer support

Overview

The OXVA XLIM Go strips the XLIM down to the essentials. There is no screen and no fire button: you fit a cartridge, fill it, and draw. The device reads the coil and sets its own power somewhere between 5W and 30W.

At 41g it is one of the lightest devices in the range, with a 1000mAh battery, a side airflow slider and a three-colour light for charge level. It takes the same XLIM cartridges as the rest of the XLIM line, so it is easy to restock.

The newer XLIM Go 2 works the same way but adds a 1500mAh battery and faster charging - worth comparing before you decide.

Compare the range

Compare the OXVA XLIM Go line

None of the Go models has a screen or a wattage setting. All three read the cartridge you fit and set power themselves between 5 and 30W, and all three fire on the draw with no button. So the choice is not about control, it is about how long the battery lasts and how fast it charges.

Compare the OXVA XLIM Go line — model comparison. Prices and availability are shown live from each product.
Attribute	OXVA XLIM Go Lite Pod Kit £6.99	OXVA XLIM Go Pod Kit £10.99You're viewing	OXVA XLIM Go 2 Pod Kit £9.99
Battery	1000mAh built in	1000mAh built in	1500mAh built in
Output	5-30W, set automatically	5-30W, set automatically to match the cartridge	5-30W, set automatically to match the cartridge
Charging	USB-C, 5V/1A	USB-C, 5V/1A	USB-C, 5V/2A
Size and weight	113.65 x 25.73 x 15.58 mm, 41.5g	113.7 x 26.0 x 14.6 mm, 41g	117.4 x 26.4 x 15.0 mm, 45.9g

Shared by all: Automatic 5-30W output, no screen and no fire button, side airflow slider, USB-C charging, and the same 2ml (TPD) XLIM cartridges in 0.4, 0.6, 0.8 and 1.2 ohm.

Comparison facts were checked against current product packaging and manufacturer information, last checked 2026-08-01. Where sources differed, evidence for the current Vape Offers SKU took priority. Each model's price and availability are shown live from its own product record.

Add your own e-liquid

E-liquid: what to use & where to buy

Nothing arrives pre-filled, so e-liquid is bought separately and the right one depends on the cartridge you fit.

The 0.8 ohm cartridge supplied with the kit is paired by OXVA with nicotine salts, and the 0.6 ohm takes freebase or salt. As a rule the tighter, cooler resistances suit higher-strength salts, and the warmer more open ones suit lower strengths.

Thick high-VG shortfills are the one thing to avoid. A mesh coil this small cannot wick liquid that heavy fast enough, and the result is a dry hit rather than a bigger cloud.

Verified resistance-specific guidance, where available, is shown with each pod in the compatibility section above. Ready to stock up?

Is this right for you?

Prefilled pods vs. the full kit

This is the kit: the XLIM Pro device itself, supplied with two cartridges so you can start straight away. If you already own an XLIM Pro and just need cartridges, buy those on their own instead - you do not need a second device.

E-liquid is separate either way. This is a refillable system, so nothing arrives pre-filled.

OXVA lists the XLIM Pro as taking the XLIM Top Fill cartridge, the V3 cartridges in 0.4, 0.6, 0.8 and 1.2 ohm, the older V2 cartridges in 0.6, 0.8 and 1.2 ohm, and OXVA's prefilled cartridges.

There is one documented exception, and OXVA states it plainly on their own specification: the XLIM C cartridge does not fit. The XLIM C is a separate platform with its own cartridges despite sharing the XLIM name.

NeXLIM cartridges are a different platform again and are not compatible either.

Before you order

What is in the kit?

1 × OXVA XLIM Go device
1 × XLIM Top Fill 0.8Ω cartridge, pre-installed
1 × user manual

OXVA does not include a USB-C cable with this kit, and no e-liquid is supplied. The cartridge is the 2ml UK version.

The basics

How it works

The XLIM Pro runs a 1000mAh battery at 5-30W and fires either on the button or by drawing on it, whichever you prefer. Airflow is set with a slider on the side of the device rather than by twisting the cartridge, so once you find your draw it stays put.

The cartridge carries the coil, so the resistance you fit is what decides the experience. OXVA publishes a wattage band for each one: 0.4 ohm at 26-30W, 0.6 ohm at 20-25W, 0.8 ohm at 12-16W and 1.2 ohm at 10-12W. The two supplied with the kit are 0.6 and 0.8 ohm, which between them cover most of the range from a warmer restricted draw to a tighter mouth-to-lung one.

Charging is over USB-C at 5V/2A.

Get started

Setup & how to use

Take the cartridge out, lift the silicone stopper on the top edge and fill slowly, leaving a small air gap rather than filling to the brim. Close the stopper firmly and seat the cartridge back in the device.

Leave a freshly filled cartridge to stand for a few minutes before the first draw, and take two or three pulls without firing to help the coil wick. This is the step most people skip, and it is the reason a brand-new cartridge can taste burnt on day one.

Set the wattage inside OXVA's band for the resistance you fitted, starting at the lower end, and open or close the side airflow slider until the draw feels right.

If something is not right

Troubleshooting

A burnt taste on a new cartridge almost always means it was fired before the wick had saturated, or that the wattage is set above OXVA's band for that resistance. Neither can be undone once the cotton has scorched, so it is worth getting right first time.

No fire or weak output is usually the contacts rather than the device. Remove the cartridge, wipe the contacts on both the cartridge and inside the device with a dry tissue, and reseat it firmly.

Gurgling or liquid in the mouthpiece points to overfilling or a stopper that has not been pressed fully shut. Very thick high-VG e-liquid can flood these coils for the same reason.

If the device will not charge, try a different USB-C cable before assuming a fault - the port collects pocket lint and a dry cocktail stick clears it.

Verified product facts

Specifications

Product type: Refillable pod kit
Battery: 1000mAh built in
Output: 5-30W, set automatically to match the cartridge
Charging: USB-C, 5V/1A
Screen: None - three-colour battery light
Airflow and firing: Side airflow slider; draw-activated only, no button
Cartridge capacity: 2ml (UK TPD), top fill
Cartridges accepted: XLIM cartridges in 0.4, 0.6, 0.8 and 1.2 ohm
Size and weight: 113.7 x 26.0 x 14.6 mm, 41g
Materials: Plastic with artificial leather panel, PCTG cartridge

Use it safely

Safety, storage & recycling

Keep the device and its built-in battery away from extreme heat, water and direct sunlight. Charge on a non-flammable surface using a USB-C lead and don't leave it charging unattended. Keep the device, pods and e-liquid out of reach of children and pets, and wash your hands after handling e-liquid.

At end of life, don't put the device in general waste — recycle it at a battery or small-electricals recycling point, or via a vape take-back scheme where available. Empty pods can be recycled with small electricals where accepted.

Helpful answers

Frequently asked questions

Can I change the wattage on the XLIM Go?

No. There is no screen and no button, so there is nothing to adjust. The device reads the cartridge you fit and sets power itself, somewhere between 5W and 30W.

If you want to set wattage yourself, you need the XLIM Pro line instead, which has a screen and a fire button.

Should I buy the Go or the Go 2?

They work identically - same automatic 5-30W output, same cartridges, same draw-activated firing, no screen on either.

The Go 2 has a 1500mAh battery against 1000mAh here, and charges at 2A rather than 1A. Unless you specifically want the smaller, lighter body, the Go 2 is the stronger buy.

Is a charging cable included?

No. OXVA lists only the device, the pre-installed 0.8Ω cartridge and the manual in the XLIM Go box. You will need your own USB-C cable.

Any standard USB-C cable works; the device charges at 5V/1A.

Do XLIM C pods fit?

No. OXVA states the Go is not compatible with XLIM C cartridges. It takes standard XLIM Top Fill cartridges in 0.4, 0.6, 0.8 and 1.2 ohm.

Editorial standards

How we verified this product

Vape Offers checked the battery, output behaviour, charge rate, cartridge compatibility, dimensions, weight, materials and pack contents against OXVA's published XLIM Go specification, accessed 1 August 2026. OXVA's own beginners blog describes a 12-30W adjustable range; the specification table and OXVA's store both state 5-30W set automatically, and that is what is published here.

OXVA XLIM Go Pod Kit

Compatible replacement pods & resistances