OXVA NeXLIM Go Pod Kit

Compatibility

Compatible replacement pods & resistances

Compatibility last checked 2026-07-30.

Verified compatibilityChecked against manufacturer data

Genuine productsAuthenticity guidance included

Secure checkout & supportEncrypted payment · UK customer support

Overview

The OXVA NeXLIM Go carries the largest battery in the NeXLIM range at 1800mAh, and does without a screen entirely. Power runs from 5W to 40W, but you do not enter a number: a slider on the side switches between Boost and Eco, and the coil you fit decides the rest.

OXVA publishes it as Boost giving 40W on a 0.3Ω coil down to 22W on 0.6Ω, and Eco giving 22W on 0.6Ω down to 13W on 1.2Ω. It fires on the draw with no button, and a three-colour light shows charge level.

It takes NeXLIM cartridges, shared with the NeXLIM, NeXLIM 2 and NeXLIM 2 Mini. XLIM cartridges are a separate platform and need an adaptor.

Compare the range

Compare the OXVA NeXLIM range

All four take the same NeXLIM UNITECH cartridges, so pods carry across the range. The NeXLIM 2 is the current full-size model, the Mini is the lighter screen-free option, the original NeXLIM is the previous full-size generation, and the NeXLIM Go is the screen-free model with the largest battery.

Compare the OXVA NeXLIM range — model comparison. Prices and availability are shown live from each product.
Attribute	OXVA NeXLIM 2 Pod Kit £29.99	OXVA NeXLIM 2 Mini Pod Kit £16.99	OXVA NeXLIM Pod Kit £24.99	OXVA NeXLIM Go Pod Kit £14.99You're viewing
Battery	2000mAh built in	1500mAh built in	1500mAh built in	1800mAh built in
Output range	5–40W	5–30W	5–40W	5-40W, set by the mode switch and the coil fitted
Display	0.85-inch colour screen with ten themes	No screen; three-colour LED	0.85-inch colour screen	None - three-colour battery light
Charging	USB Type-C, 5V/3A	USB Type-C, 5V/2A	USB Type-C, 5V/2A	USB Type-C, 5V/2A
Included pods	UNITECH 3.0 0.6Ω and 0.8Ω	Not stated	NeXLIM 0.6Ω and 0.8Ω	One 0.8Ω NeXLIM cartridge
Charging cable	Yes; USB Type-C cable listed in the TPD pack	No; not listed in the TPD pack	Yes; USB Type-C cable listed in the pack	Not included
Modes	BOOST and ECO	Touch-controlled BOOST and ECO	BOOST and ECO	Boost and Eco, changed with a side slider
Compatible cartridges	NeXLIM UNITECH 3.0, UNITECH 2.0 and NeXLIM empty-cartridge/coil format	NeXLIM UNITECH 3.0, UNITECH 2.0 and NeXLIM empty-cartridge/coil format	NeXLIM UNITECH 3.0 and UNITECH 2.0	NeXLIM cartridges; XLIM only with a NeXLIM adaptor

Shared by all: 2ml (TPD) NeXLIM UNITECH cartridges in 0.6Ω, 0.8Ω and 1.2Ω, three-level side airflow, BOOST and ECO modes, USB Type-C charging and an MTL to RDL draw.

Comparison facts were checked against current product packaging and manufacturer information, last checked 2026-08-01. Where sources differed, evidence for the current Vape Offers SKU took priority. Each model's price and availability are shown live from its own product record.

Add your own e-liquid

E-liquid: what to use & where to buy

OXVA lists nicotine salt and freebase e-liquid for NeXLIM cartridges. Balanced 50/50 blends are the safest general choice. Higher resistance and tighter airflow suit MTL use; 0.6Ω and a more open airflow suit lower-strength liquid and RDL-style use.

Verified resistance-specific guidance, where available, is shown with each pod in the compatibility section above. Ready to stock up?

Is this right for you?

Prefilled pods vs. the full kit

Choose a NeXLIM kit when you need a rechargeable device and its first cartridge. Choose NeXLIM replacement pods when you already own NeXLIM 2, NeXLIM 2 Mini, the original NeXLIM or NeXLIM Go. The replacement pack contains cartridges only and no battery.

NeXLIM UNITECH 3.0 and 2.0 cartridges fit NeXLIM 2, NeXLIM 2 Mini, the original NeXLIM and NeXLIM GO. Use 0.6Ω, 0.8Ω or 1.2Ω according to the draw required. OXVA XLIM pods are a separate family and are not compatible.

Before you order

What is in the kit?

1 × OXVA NeXLIM Go device
1 × NeXLIM 0.8Ω cartridge
1 × user manual

OXVA does not include a USB-C cable with this kit. The cartridge is the 2ml UK version and no e-liquid is supplied.

The basics

How it works

NeXLIM UNITECH cartridges combine the reservoir and dual-mesh coil in one replaceable pod. BOOST and ECO alter the power behaviour, while the airflow control changes draw restriction. UNITECH 3.0 is the current cartridge generation; OXVA also confirms compatibility with UNITECH 2.0 across the current NeXLIM devices.

Get started

Setup & how to use

Open the top-fill port and add suitable e-liquid without filling the centre airflow.
Close the seal and leave a new cartridge upright for five minutes.
Insert the cartridge fully into the NeXLIM device.
Select ECO or BOOST and begin with moderate airflow.
Take a gentle first draw and adjust power or airflow gradually.

If something is not right

Troubleshooting

Burnt taste: stop, check the liquid and priming time, and reduce power if it is above the pod's suitable range.
Gurgling: dry the pod base and device recess, confirm the top seal is closed and use slower draws.
No atomiser or no output: remove the cartridge, clean the dry contacts and refit it. Try a fresh compatible pod if needed.
Weak flavour: check liquid level, airflow and mode; replace the pod if flavour remains flat.

Verified product facts

Specifications

Product type: Refillable pod kit
Battery: 1800mAh built in
Output range: 5-40W, set by the mode switch and the coil fitted
Modes: Boost and Eco, changed with a side slider
Charging: USB Type-C, 5V/2A
Display: None - three-colour battery light
Airflow: Side airflow control
Activation: Draw-activated only, no button
UK cartridge capacity: 2ml
Included cartridges: One 0.8Ω NeXLIM cartridge
Compatible resistances: 0.6Ω, 0.8Ω and 1.2Ω NeXLIM
Compatible cartridges: NeXLIM cartridges; XLIM only with a NeXLIM adaptor
Dimensions: 122.0 × 28.5 × 17.5mm
Weight: 87.5g
Materials: PC and PCTG with a PU panel
Charging cable: Not included

Use it safely

Safety, storage & recycling

Keep the device and its built-in battery away from extreme heat, water and direct sunlight. Charge on a non-flammable surface using a USB-C lead and don't leave it charging unattended. Keep the device, pods and e-liquid out of reach of children and pets, and wash your hands after handling e-liquid.

At end of life, don't put the device in general waste — recycle it at a battery or small-electricals recycling point, or via a vape take-back scheme where available. Empty pods can be recycled with small electricals where accepted.

Helpful answers

Frequently asked questions

Can I use XLIM pods in the NeXLIM Go?

Only with a NeXLIM adaptor. The device natively takes NeXLIM cartridges in 0.6, 0.8 and 1.2 ohm; OXVA lists XLIM cartridges as usable only through that adaptor, which is sold separately.

NeXLIM cartridges are shared across the whole NeXLIM range, so they also fit the NeXLIM, NeXLIM 2 and NeXLIM 2 Mini.

How do Boost and Eco work without a screen?

A physical slider on the side switches between them, and the power is then set by which coil you have fitted rather than by you entering a number.

OXVA publishes it as: Boost gives 40W on a 0.3Ω coil, 30W on 0.4Ω and 22W on 0.6Ω. Eco gives 22W on 0.6Ω, 16W on 0.8Ω and 13W on 1.2Ω.

Does it come with a cable?

No. OXVA lists only the device, one 0.8Ω NeXLIM cartridge and the manual. Bring your own USB-C lead; OXVA quotes about 45 minutes to a full charge at 5V/2A.

Editorial standards

How we verified this product

Vape Offers checked the battery, mode behaviour and per-coil wattages, charge rate, cartridge compatibility, weight, materials and pack contents against OXVA's published NeXLIM Go specification, accessed 1 August 2026. OXVA publishes two different sets of dimensions for this device - 122.0 × 28.5 × 17.5mm on its main site and 119 × 28.5 × 18mm on its store. The main-site figures are used here and the discrepancy is unresolved by OXVA.

OXVA NeXLIM Go Pod Kit

Compatible replacement pods & resistances