• Same Day Dispatch Before 5PM

  • Free UK Delivery Over £30
  • Trustpilot
    Trustpilot
1 4
OXVA

OXVA NeXLIM Replacement Pod Cartridges (UniTech 3.0)

£8.99
Tax included, shipping and discounts calculated at checkout.
  • Three 2ml top-fill cartridges
  • 0.6Ω, 0.8Ω and 1.2Ω options
  • Battery device not included
Same-day dispatch before 5pmOrder Monday to Friday before 5pm for same-day dispatch.
Free standard UK delivery over £30Fast UK delivery options are available at checkout. See delivery details.
Compatibility

Compatible devices

OXVA NeXLIM 2 Pod Kit OXVA NeXLIM 2 Pod Kit £29.99
  • 0.6Ω
  • 0.8Ω
  • 1.2Ω
OXVA NeXLIM 2 Mini Pod Kit OXVA NeXLIM 2 Mini Pod Kit £16.99
  • 0.6Ω
  • 0.8Ω
  • 1.2Ω
OXVA NeXLIM Pod Kit OXVA NeXLIM Pod Kit £24.99
  • 0.6Ω
  • 0.8Ω
  • 1.2Ω
OXVA NeXLIM Go Pod Kit OXVA NeXLIM Go Pod Kit £14.99
  • 0.6Ω
  • 0.8Ω
  • 1.2Ω

Compatibility last checked 2026-07-30.

Which resistance?

Choosing your resistance

0.6Ω
Warmest and most open of the three; restricted DTL · OXVA states nicotine salt and freebase are both suitable; a balanced 50/50 liquid is the conservative starting point
0.8Ω
Middle option — restricted MTL to light RDTL · OXVA states nicotine salt and freebase are both suitable; a balanced 50/50 liquid is the conservative starting point
1.2Ω
Tightest and most cigarette-like MTL · Suits higher-strength nicotine salts; a balanced 50/50 liquid is the conservative starting point

As a rule, higher resistance gives a tighter draw at lower power and lower resistance a warmer, airier draw. Follow the manufacturer's guidance for this device. Select your resistance above to see price and availability.

Verified compatibilityChecked against manufacturer data
Genuine productsAuthenticity guidance included
Secure checkout & supportEncrypted payment · UK customer support
Overview

OXVA NeXLIM Replacement Pod Cartridges (UniTech 3.0)

OXVA NeXLIM UNITECH 3.0 replacement pods are 2ml top-fill cartridges with built-in dual-mesh coils. Each pack contains three pods in the selected 0.6Ω, 0.8Ω or 1.2Ω resistance. OXVA confirms compatibility with NeXLIM 2, NeXLIM 2 Mini, the original NeXLIM and NeXLIM GO.

Choose 1.2Ω for the tightest MTL draw, 0.8Ω for a balanced MTL-to-RDL middle ground, or 0.6Ω for the most open and higher-output option. UNITECH 3.0 is the current generation; the compatible devices also accept UNITECH 2.0. OXVA XLIM pods are not compatible, despite the similar family name.

These are replacement cartridges only and contain no battery or e-liquid. If you need a device, compare the NeXLIM 2 and NeXLIM 2 Mini before ordering.

Add your own e-liquid

E-liquid: what to use & where to buy

OXVA lists nicotine salt and freebase e-liquid for NeXLIM cartridges. Balanced 50/50 blends are the safest general choice. Higher resistance and tighter airflow suit MTL use; 0.6Ω and a more open airflow suit lower-strength liquid and RDL-style use.

Verified resistance-specific guidance, where available, is shown with each pod in the compatibility section above. Ready to stock up?

Is this right for you?

Prefilled pods vs. the full kit

Choose a NeXLIM kit when you need a rechargeable device and its first cartridge. Choose NeXLIM replacement pods when you already own NeXLIM 2, NeXLIM 2 Mini, the original NeXLIM or NeXLIM Go. The replacement pack contains cartridges only and no battery.

NeXLIM UNITECH 3.0 and 2.0 cartridges fit NeXLIM 2, NeXLIM 2 Mini, the original NeXLIM and NeXLIM GO. Use 0.6Ω, 0.8Ω or 1.2Ω according to the draw required. OXVA XLIM pods are a separate family and are not compatible.

Before you order

What is included?

  • 3 × OXVA NeXLIM UNITECH 3.0 2ml cartridges in the selected resistance

Battery device and e-liquid are not included.

The basics

How it works

NeXLIM UNITECH cartridges combine the reservoir and dual-mesh coil in one replaceable pod. BOOST and ECO alter the power behaviour, while the airflow control changes draw restriction. UNITECH 3.0 is the current cartridge generation; OXVA also confirms compatibility with UNITECH 2.0 across the current NeXLIM devices.

Get started

Setup & how to use

  1. Open the top-fill port and add suitable e-liquid without filling the centre airflow.
  2. Close the seal and leave a new cartridge upright for five minutes.
  3. Insert the cartridge fully into the NeXLIM device.
  4. Select ECO or BOOST and begin with moderate airflow.
  5. Take a gentle first draw and adjust power or airflow gradually.
If something is not right

Troubleshooting

  • Burnt taste: stop, check the liquid and priming time, and reduce power if it is above the pod's suitable range.
  • Gurgling: dry the pod base and device recess, confirm the top seal is closed and use slower draws.
  • No atomiser or no output: remove the cartridge, clean the dry contacts and refit it. Try a fresh compatible pod if needed.
  • Weak flavour: check liquid level, airflow and mode; replace the pod if flavour remains flat.
Verified product facts

Specifications

Product type
Refillable replacement pod
Pack size
3 pods
Pod capacity
2ml each
Fill method
Top fill
Coil type
Built-in dual mesh, UNITECH 3.0
Resistance options
0.6Ω, 0.8Ω and 1.2Ω
Compatible devices
NeXLIM 2, NeXLIM 2 Mini, NeXLIM and NeXLIM GO
Suggested e-liquid
Nicotine salt or balanced freebase e-liquid
Battery device included
No
Use it safely

Safety, storage & recycling

Store pods upright, away from heat, direct sunlight and moisture, and keep pods and e-liquid out of reach of children and pets. Wash your hands after handling e-liquid, and replace a pod if it leaks or the flavour dulls.

At end of life, recycle empty pods with small electricals or via a vape take-back scheme where available rather than general waste.

Helpful answers

Frequently asked questions

Which devices fit OXVA NeXLIM UNITECH 3.0 pods?

OXVA lists NeXLIM 2, NeXLIM 2 Mini, the original NeXLIM and NeXLIM GO. XLIM devices use a different pod family.

Which NeXLIM resistance should I choose?

Choose 1.2Ω for the tightest MTL draw, 0.8Ω for a balanced middle ground and 0.6Ω for the warmest, most open RDL-style option.

How many NeXLIM pods are in a pack?

The UNITECH 3.0 retail pack contains three 2ml pods in the resistance selected.

Are UNITECH 3.0 pods compatible with older NeXLIM devices?

Yes. OXVA explicitly lists the original NeXLIM and NeXLIM GO as compatible alongside NeXLIM 2 and 2 Mini.

Do NeXLIM replacement pods include the vape device?

No. This is a three-cartridge replacement pack. A compatible rechargeable NeXLIM device and e-liquid are required separately.

How long should I prime a new NeXLIM pod?

After filling, close the seal and leave the pod upright for about five minutes before the first draw.

When should I replace a NeXLIM cartridge?

Replace it when flavour remains weak, it tastes burnt despite enough liquid and correct power, or leaking or gurgling continues after cleaning and refitting.

Editorial standards

How we verified this product

Vape Offers checked the 2ml TPD capacity, three-pod pack, top-fill design, resistance options and four-device compatibility directly against OXVA's UNITECH 3.0 cartridge specification. Anti-leak and lifespan figures remain manufacturer claims rather than guarantees. The received-stock generation is still being confirmed with the supplier; this listing keeps its existing handle until that check completes.


Warning: Products sold on this website may contain nicotine, a highly addictive substance. They are not suitable for individuals under 18, pregnant or nursing women, or those with heart or respiratory conditions. Keep away from children, pets, and flammable materials. Use only as directed. If swallowed, seek immediate medical attention.