Vaporesso XROS COREX 3.0 Refill Pods – 4 Pack

Compatibility

Compatible devices

Compatibility last checked 2026-07-21.

Which resistance?

Choosing your resistance

0.4Ω: Warmest, most open; RDTL
0.6Ω: Warm RDTL
0.8Ω: Balanced MTL
1.0Ω: Tighter MTL
1.2Ω: Tightest MTL

As a rule, higher resistance gives a tighter draw at lower power and lower resistance a warmer, airier draw. Follow the manufacturer's guidance for this device. Select your resistance above to see price and availability.

Verified compatibilityChecked against manufacturer data

Genuine productsAuthenticity guidance included

Secure checkout & supportEncrypted payment · UK customer support

Overview

Vaporesso XROS COREX 3.0 Replacement Pods

The Vaporesso XROS COREX 3.0 Replacement Pods are a four-pack of empty, refillable 2ml pods with integrated COREX 3.0 Hive Mesh coils. Vaporesso's current design uses a Hive Mesh structure, a nano-microfibre process and aerospace-grade cotton materials. Each pod fills from the top beneath the removable mouthpiece and is replaced as a complete unit when the integrated coil is spent.

Choose 0.4Ω, 0.6Ω, 0.8Ω, 1.0Ω or 1.2Ω. Higher-resistance options give progressively tighter mouth-to-lung draws; lower-resistance options produce a warmer, airier vape. The 0.6Ω–1.2Ω pods fit the wider XROS family, while 0.4Ω needs a supported newer XROS device. These pods are refillable and arrive empty; e-liquid and the XROS device are sold separately. Prefer the previous-generation coil? See the XROS COREX 2.0 pods. Find your device in the Vaporesso XROS pod kits, browse more Vaporesso pods, the full Vaporesso collection, or all refillable vape pods.

Compare the range

Compare XROS COREX replacement pods

Compare XROS COREX replacement pods — model comparison. Prices and availability are shown live from each product.
Attribute	Vaporesso XROS COREX 2.0 Replacement Pods £9.99	Vaporesso XROS COREX 3.0 Replacement Pods £9.99You're viewing
Best for	Established XROS pod generation with manufacturer-published wattage guidance	Latest COREX generation with Hive Mesh construction
Heating technology	COREX 2.0 Morph-Mesh with upgraded cotton	COREX 3.0 Hive Mesh with nano-microfibre process and aerospace-grade cotton

Shared by all: Both listings contain four refillable 2ml top-fill pods in one selected resistance, with integrated coils and 0.4Ω–1.2Ω options. Check the resistance-specific device list because 0.4Ω has more limited compatibility.

Comparison facts were checked against current product packaging and manufacturer information, last checked 2026-07-21. Where sources differed, evidence for the current Vape Offers SKU took priority. Each model's price and availability are shown live from its own product record.

Add your own e-liquid

E-liquid: what to use & where to buy

Vaporesso states that XROS pods can be used with freebase and nicotine-salt e-liquids. Match the liquid to the selected resistance and compatible device. Balanced 50/50 liquids are the conservative starting point for mouth-to-lung options; do not apply one fixed nicotine strength or one universal high-VG recommendation across every resistance.

Verified resistance-specific guidance, where available, is shown with each pod in the compatibility section above. Ready to stock up?

Is this right for you?

Prefilled pods vs. the full kit

This listing contains replacement pods only. A Vaporesso XROS device and e-liquid are required and are sold separately.

XROS pod fit varies by resistance. The 0.6Ω, 0.8Ω, 1.0Ω and 1.2Ω versions support the wider XROS family. The 0.4Ω version is intended for supported newer XROS models; use the resistance-specific compatibility list on the product page.

Before you order

What is included?

4 × Vaporesso XROS COREX 3.0 2ml pods in the selected resistance
Device and e-liquid are not included

The basics

How it works

Each XROS pod contains its own mesh heating coil and wick. After filling and priming, insert the pod into a compatible XROS device. The device supplies power when activated; e-liquid reaches the integrated coil and is vaporised. When flavour falls away or a persistent burnt taste develops, replace the complete pod rather than a separate coil.

Get started

Setup & how to use

Check that the selected resistance is supported by your XROS device.
Remove the pod mouthpiece to expose the filling area.
Add e-liquid through the correct fill port, keeping liquid out of the central airflow channel.
Refit the mouthpiece securely and wipe away any excess liquid.
Leave a new pod upright for at least five minutes so the wick can saturate.
Insert the pod fully into the device and use the device's automatic or adjustable power controls as designed.

If something is not right

Troubleshooting

Gurgling or liquid in the mouthpiece: remove excess condensation, check that the mouthpiece is closed correctly and avoid overfilling.
Leaking: inspect the pod for damage, confirm the mouthpiece and fill seal are secure, keep the device upright where practical and replace a damaged pod.
Burnt taste: stop vaping, check the liquid level and allow more saturation time. Replace the pod if the burnt taste remains.
No vapour: reseat the pod, clean the contacts and confirm the device is charged and the resistance is supported.
Weak flavour or vapour: check the liquid level, airflow and device mode, then replace the pod if performance does not recover.
0.4Ω pod not recognised: do not force use; confirm that the exact XROS model supports 0.4Ω and choose a compatible resistance if it does not.

Verified product facts

Specifications

Product type: Refillable replacement pod with integrated mesh coil
Pack size: 4 pods in the selected resistance
Pod capacity: 2ml
Resistance options: 0.4Ω, 0.6Ω, 0.8Ω, 1.0Ω and 1.2Ω
Fill method: Top-fill beneath the removable mouthpiece
Heating technology: COREX 3.0 Hive Mesh with nano-microfibre process and aerospace-grade cotton
Coil format: Built-in coil; replace the complete pod
Draw range: MTL to RDTL, depending on resistance and device airflow
Pod material: PCTG
Leak-resistant design: Vaporesso SSS technology
Compatibility: XROS series; 0.4Ω is limited to supported newer models
Power pairing: Device-dependent; use the compatible kit's automatic or adjustable control

Use it safely

Safety, storage & recycling

Store pods upright, away from heat, direct sunlight and moisture, and keep pods and e-liquid out of reach of children and pets. Wash your hands after handling e-liquid, and replace a pod if it leaks or the flavour dulls.

At end of life, recycle empty pods with small electricals or via a vape take-back scheme where available rather than general waste.

Helpful answers

Frequently asked questions

Are XROS COREX 3.0 pods refillable or prefilled?

They are refillable pods supplied empty. Add your own suitable e-liquid; no e-liquid or nicotine is included.

How many COREX 3.0 pods are in a pack?

Each retail pack contains four 2ml pods in the resistance selected on this page. The pack does not mix resistances.

Which devices use XROS COREX 3.0 pods?

The 0.6Ω, 0.8Ω, 1.0Ω and 1.2Ω versions fit the wider Vaporesso XROS series. The 0.4Ω pod needs a supported newer model, so select a resistance and check the compatible-device list before ordering.

Which XROS devices support the 0.4Ω pod?

Supported current models include XROS Pro, XROS Pro 2, XROS 4, XROS 4 Mini, XROS 4 Nano, XROS 5, XROS 5 Mini, XROS 5 Nano, XROS 6 and XROS 6 Mini.

Which COREX 3.0 resistance should I choose?

Choose 0.4Ω for the warmest and most open option on a supported device, 0.6Ω for a warmer RDTL draw, 0.8Ω for a balanced MTL draw, 1.0Ω for a tighter MTL draw, or 1.2Ω for the tightest option. The device's airflow and power behaviour also affect the draw.

How do I fill and prime a COREX 3.0 pod?

Remove the mouthpiece, add e-liquid through the correct fill opening, close the pod and leave it upright for at least five minutes before first use. Do not put e-liquid into the central airflow channel.

What does COREX 3.0 change from COREX 2.0?

COREX 3.0 is Vaporesso's newer Hive Mesh generation and uses a nano-microfibre process with aerospace-grade cotton materials. COREX 2.0 uses its earlier Morph-Mesh design and has manufacturer-published best-wattage figures. The useful buying decision remains generation, resistance, preferred draw and device fit.

Can I use nicotine salts or freebase e-liquid?

Vaporesso states that XROS pods can be used with nicotine-salt and freebase e-liquids. Match the liquid to the resistance and device; no fixed nicotine strength is prescribed on this page.

When should I replace a COREX 3.0 pod?

Replace the complete pod when flavour stays muted, vapour remains weak, liquid becomes unusually dark around the coil, or a burnt taste continues after checking the fill and allowing the wick to saturate. There is no fixed lifespan because liquid, power and usage vary.

Do COREX 3.0 pods use replaceable coil heads?

No. Each pod contains an integrated coil. Replace the whole pod when the coil reaches the end of its useful life.

Editorial standards

How we verified this product

Verified against the current Vape Offers variants and 2ml product imagery, plus official Vaporesso XROS pod and current-device information. Compatibility is stated by resistance; unsupported best-wattage, nicotine-strength and fixed pod-life claims are omitted. Last checked 21 July 2026.

Vaporesso XROS COREX 3.0 Replacement Pods

Compatible devices

Choosing your resistance

Vaporesso XROS COREX 3.0 Replacement Pods

Compare XROS COREX replacement pods

E-liquid: what to use & where to buy

Prefilled pods vs. the full kit

What is included?

How it works

Setup & how to use

Troubleshooting

Specifications

Safety, storage & recycling

Frequently asked questions

How we verified this product

Customer Reviews

Your cart

HELP CENTER

INFORMATION

SHOP & LEARN